Detailed Product Description

100M SM/MM media Convertor

APT-103SM34O single/multimode fiber optic conversion is used to change the
multimode photoelectricity signal into single mode photoelectricity signal. The function
is using one equipment to connect with different module signals between two network
segments, and increase the agility of layout the UTP. Due to signal according
to optical impulse modality to transmit the signal in fiber optical, compared
with copper lead, has more excellence: security, dependability, long transmit
distance, high transmit speed, and convenient to be used to LAN and MAN. By adopting
modularization configure design, it is convenient to put in rack mount.

APT-103SM34OC series adopts 155M dual fiber dual direction fiber transmitting and
receiving module. According to IEEE802.3u, 100Base-FX standard, APT-103SM34OC series fiber optic conversion can put 100M multimode signal into 100M single mode signal.
This conversion has two SC interface, used for multimode and single mode
fiber, having three LED indicators: A, B, power

Technical parameters:
1. According to IEEE802.3 IEEE802.3u IEEE802.3X IEEE802.1Q 100BASE-TX 100BASE-TX
100BASE-FX standard
2. Supports TCP/IP PPPOE DHCP ICMP NA protocol
3. Follow control: full duplex adopt IEEE802.3X, half-duplex adopt backpressure standard
4. Supports storage transmit mode
5. Supports state indicator, external power supply (output 5V-50Hz)
6. Interface: electric port: RJ-45; fiber port: SC
7. Twisted pair: Cat5, Cat5
8. Multimode fiber: 50/125, 62.5/125
9. Single mode fiber: 8/125, 8.3/125, 9/125
10. Working temperature: 0~50°C
11. Storage temperature: -20~70°C
12. Humidity: 5%~90%
13. Size: 119 x 87 x 28mm (L x W x H)

Specifications:
1) Connect type: SC
2) Fiber type: multimode/single mode
3) Wavelength: 850/1310nm
4) Typical distance: 550m/40km
5) Min TX PWR: -19.0dBm/-8.0dBm
6) Max TX PWR: -14.0dBm/-0.0dBm
7) Sensitivity: <-31.0dBm/32.0dBm
8) Link budget: 12.0dBm/24.0dBm